Get PC error-free in minutes
Here are some easy ways that can help you resolve the Roomba 500 charging error 2 issue. Charging error 2 means that the Roomba i-Series battery is not charging. Remove the bezel by brushing the eyebrows and bottom cover to get normal access to the battery and check if you are using a genuine iRobot® battery. Charging errors may occur when using counterfeit batteries.
loadingÃ—Sorry for the interruptionUpdate
Did your Roomba just give you a terrifying error code? Do not panic! Some problems are easy to solve. Check out this detailed troubleshooting guide for Roomba.Models
Different devices behave a little differently when it comes to learning error codes: some emit a beep, others report the error in physical words. But, fortunately, the error limits are basically the same even for different types of models.
How do I reset my Roomba 500 battery?
Turn on your personalized Roomba by pressing the cleaning control button.Press and hold the “Spot” and “Dock” links that are clicked above and below the “Clean” link for 10 seconds.Release the buttons at the same time for a while and you will hear your favorite Roomba sound.
The following error codes apply to Roomba 500, 600, 700 and 800 series:
Clean Up Error
How do I fix error 2 on Roomba?
Roomba® 700 Series reports: “Error number two (2). Empty Roomba’s dustbins, then press CLEAN to restart.”
Beep Error 1 / 3 (Roomba 500 and 600 series)
Roomba says “Mistake 1: move Roomba to really go to a new location, then press CLEAN to start.” This usually happens when the Roomba gets stuck somewhere or the side wheel gets stuck.
The Fix: You can turn Roomba upside down and align the side wheels topour hair or debris and move the wheels forward so that many people can get in and out freely. Finally, turn on Roomba and click “Recent” to check if the error has already been fixed. beep
1 or no voice error (Roomba 700 and 800 series)
Make sure the dust box is properly installed back into Roomba.
2 signals / Error 2
Why does my Roomba says charging error?
A specific charging error code of 1 could mean that Roomba was unable to locate the battery correctly. This can happen if the battery you put in the vacuum does not fit or is not recognized by iRobot. You can also solve this problem if the electricalThe battery contacts are rusted or covered with dust.
Roomba says “Error 2. Open both grill and Roomba clean brushes.” If you are accessing this error, it is most likely hair stuck to the styling brushes. You may not be cleaning your Roomba brushes often enough, and the bristles may be preventing the brushes from rotating properly.
Troubleshooting. Extract the hair following the instructions in this video:
Advice. Cleaning the styling brushes on older models can often be quite tedious. Newer Roomba models such as the 860 and 960 have replaced the old brushes with bristle-free rollers, making Roomba maintenance much easier.
5 beeps / Error 5
Roomba says “Error 5. Spin Roomba’s wheels to clear them.” This error indicates that one of the wheels is permanently blocked, which mayIt cannot be the result of an obstacle a bis along with the wheels.
Remedy: Remove hair and dirt from my wheels and check if the wheel motors turn freely.
6 error signals 6
Roomba says “Error 6: Move Roomba to new location, then clear media channels to restart.” This happens in one of the following situations: After (1) the cliff sensors may be dirty (2) Roomba is stuck, on the edge of a cliff, or on some dark surface (which looks like your own cliff to Roomba).< /p >
To solve this problem: Wipe the drop sensors with a tissue or blow them with compressed air, then simply move Roomba to a new location and put it clean to restart.
7 beeps – error 7
How do I fix my Roomba not charging?
If Roomba won’t charge, use a soft cloth and rubbing alcohol to clean the charging ports of dust, hair, and debris. You may also need to reinstall or replace the battery or charging station, or even reset Roomba to factory settings.
Fixed: Check people for obstacles, remove obstacles, and drag wheels up and down to move debris. Become the wheels by hand so that businesses can move freely.
9 / error 9 squeaks
Roomba says “Error 9: Click on Roomba’s bumpers to clear them.” This happens when the bumper sensors are hard or the area isMust be dirty between Roomba and bumpers.
Repair. Start by hitting the bumper a few times to separate the debris and make sure it snaps back into place. If this does not resolve the nature of the problem, you may need to tidy up the area between the bumpers, usually between the bumper and the Roomba. This will remove all debris and also clean our own bumper sensors.
10 signals / 10
“Error Error 10: Rotate the side wheels of a robot that can clean.” This means Roomba’s door wheels (two wheels of different sizes) can’t turn or Roomba is stuck on something.
How to fix: If a Roomba is stuck somewhere, simply move it to a new location and press CLEAN to reset it. If not, make sure the side wheels have no obstructions preventing them from turning. Push the wheels in and together to separate debris, and immediately assemble the wheels by hand to make sure they are not attached to anything (such as hair). .
This error can also occur if your cabin has a very large open space with very littlethe number of items. To solve this problem, use virtual walls to divide a large area into several short areas. For more information on this issue, see this forum post.
“Error 11” is undoubtedly essentially the same error as error 10.
4 mute drum sounds
Remedy: Fully charge most Roomba. Also follow these steps to extend Roomba’s battery life: